Category: Holidays

Tuesday with Wendy, Jan 22

1/25/2019

This week for Wendy's card making class, Wendy was at it again designing cards you can use for Valentine's Day!!!

(And let's admit it... who doesn't love receiving a Valentine?!!?)

Check out how wonderful the cards are!!

The first card Wendy made was inspired from this set from Taylored Expressions, You Make My Heart Soar as well as 2 sets from Penny Black, Heart Balloons and Hearts Galore

To make the card:

Start with a pink piece of card stock as your card base
Take a piece of red card stock and a piece of Gold Stardream paper. Use your Home Die-cut Machine to cut out 2 sizes of the Heart Balloons at the same time.
ON THE INSIDE OF THE CARD, adhere the BACKGROUND of the the balloon cut-outs.. Take the Gold Stardream paper (with the Heart Balloon cut out of it) and adhere it with double-sided tape. THEN place the red card stock that is ALSO balloon shaped (with the little balloon shape cut-out of the middle) and adhere that in the middle of the balloon cut-out in the middle of the card. The red card stock Heart Balloon should fit PERFECTLY in the Gold Stardream cut-out Heart Balloon. You will have a piece of pink card stock peeking through that looks like a little pink heart balloon!
Stamp your sentiment, "Wishing you tons of love xoxo" in the middle of the pink heart balloon shape using Versafine Clair ink, Charming Pink and use Detail Gold Embossing Powder and heat-set it.

Next, ON THE FRONT OF THE CARD, lay down a piece of Lavendar Stardream paper and adhere it with double sided tape.
Now take a piece of Shizen Handmade Cotten Paper and cut out the die-cut, Hearts Galore (SAVE THE CUT-OUTS!! You can use those in a future card!). Now take the paper that has the little hearts cut out of it and adhere it onto the front of the card base, on top of the Lavendar Stardream paper
Take your 2 Heart Balloons and layer them on the front. Use the Nuvo Deluxe Adhesive to adhere the large Heart Balloon first. Then, use a pop-dot to pop-up the little Heart Balloon in the middle of the big Heart Balloon.
Tie a little bit of purple twine on the end of the little Heart Balloon and wrap the twine around the card and use a little bit of Deluxe Adhesive to hold the twine in place.
Next, stamp the Elephant image with Versafine Clair ink, Monarch. Fussy-cut the Elephant image and use a pop-dot to adhere him to the front of the card. Tie the other side of the twine around the trunk of the little elephant so it looks like the Heart Balloons are helping him soar!!

Isn't this such a sweet card?! I love how she used the Heart Balloons AND the reverse cut-outs to make this card fun on the inside and the outside!!

The next card that Wendy designed was made using the same 2 Penny Black die-cuts, Hearts Galore and Heart Balloons

To make the card:

Start with a piece of coral-colored card stock as your card base. Cut a piece of floral-themed paper and mount it onto the front of the card base using double-sided tape.
Use a piece of red card stock to cut out one of the Heart Balloons. Use the REVERSE heart-cut out piece and overlay a piece of Acetate on the back (so you have a heart window with Acetate covering it). Adhere the Acetate in place with double-sided tape.
Next, use Mounting Tape (on the Acetate side of the heart window) to wrap around the outside of the heart shape. Then tuck in the "confetti" heart cut-outs from the Hearts Galore die-cut, and adhere it to the front of the card base on top of the floral paper.
Take a small piece of Gold Stardream paper and cut out a smaller Heart Balloon and cut the "balloon tip" part of it so it looks like a normal heart. Use double-sided tape to adhere it in place.. Wendy was clever in designing this card.. she placed the gold heart so it COVERS the "balloon tip" of the heart window we created earlier
To finish off the card, Wendy used an *even smaller* piece of floral paper and cut a final small Heart Balloon and ALSO cut off the "balloon tip" part. She then mounted the heart onto the gold heart using a pop-dot.

I love how this card turned out!! This card is really fun as a Shaker Card.. but doesn't HAVE TO be one! The Acetate over the heart window is just so fun on it's own!!

The last card that Wendy designed was made using this STUNNING stamp set from Darkroom Door, Nature Walk, this die-cut from Paper Rose, Stitched Ovals as well as this sentiment stamp from Impression Obsession, One Person.

To make the card:

Wendy started out with an ivory-colored card stock and layered a piece of Gold-Leaf Stardream card stock onto the front of the card.
Then, Wendy used her Home Die-cut Machine to die-cut a Stitched Oval for the front of her card, she cut this out of the same ivory-colored card stock as her card base.
On the Stitched Oval, stamp the wildflower and sprigs from the Nature Walk stamp set. Wendy stamped with 2 colors of ink: Versafine, Smokey Grey AND Versafine Clair, Morning Mist. The 2 shades of grey look SO GOOD together!! Wendy stamped the images several times so you get the shadow effects from the "ghost" stamping
Then, Wendy stamped the sentiment on the same color of ivory card stock with the Versafine Smokey Grey ink. She tore the paper around the sentiment to give it a "distressed" look. Then she used the Nuvo Deluxe Adhesive to adhere the sentiment to a piece of dark brown card stock. She then tore around that card stock too so that she got a layered/shadow effect
Wendy mounted the sentiment to the front of the card by using a couple pop-dots

Isn't this just a GORGEOUS CARD? I love how simple and elegant it looks... fantastic design!!

Have you always wanted to take a card making class?? Give us a call to sign up for the next one!

Tuesday, February 5th
$10 class fee
*3 class times available*
PLEASE SIGN UP AHEAD OF TIME!!

360-647-9663

Tuesday with Wendy, Dec 18th

12/21/2018

Wendy is READY FOR WINTER TO BE OVER!! (and it just started!!)

Check out her cards from class last week... the theme is.. YOU GUESSED IT!!.. Valentine's and Love cards!

The first card that Wendy designed was inspired from this new die-cut from Taylored Expressions, Framed Script- Love. Wendy also used this Nesting Rounded Rectangle die-cut set from Hero Arts

To make the card:

Wendy used a peach-colored card stock as her card base
She picked a paper from the new paper collection, Garden Goddess (by Graphic 45) as the background. It is a BEAUTIFUL floral paper in peach and pink tones.
Using the Hero Arts Nesting Rounded Rectangles, cut out a rounded rectangle from solid paper (Wendy chose a vibrant coral color)
Then, die-cut the Framed Script Love from the same kind of floral paper as the background
Use the Nuvo Deluxe Adhesive to adhere the Framed Script Love to a piece of bright green card stock and then fussy-cut around the Framed Script Love so the bright green card stock only shows up behind the word "love"
Mount the Framed Script Love onto the Rounded Rectangle die-cut using double-sided tape
Mount the rounded rectangle onto the floral paper using Mounting Tape (for a little dimension). Tape the entire design onto your card base using double-sided tape.
Finish off the card by tying a bit of dark green sheer ribbon on the front of the card on the far left side and using Diamond Stickles to outline the Framed Script Love so it looks glittery

Isn't this card beautiful?! I LOVE the combination of colors and the floral image is just gorgeous.

The next card was made with the new Big Heart stamp from Taylored Expressions and this embossing folder from Sizzix, Tiny Dots

To make the card:

Start with a light pink card stock as your card base
Use your home die-cut machine to emboss a small piece of white card stock... Apply Versafine Onyx Black Ink to the INSIDE of the tiny dots embossing folder and then place your piece of white card stock inside the embossing folder and run it through your home die-cut machine. The ink will transfer as well as the tiny dots impression on your paper.
Adhere the piece of embossed white card stock to a piece of black card stock using double-sided tape. Mount the entire design onto the front of the card base on the left side.
Next, take a piece of pink wood grain patterned paper and cut it down to a square and fold the square in half. Wrap a piece of black polka-dot ribbon around the folded square so it will tie closed when the square is folded.
Adhere the back side of the folded square down to the card base on the right side. It will slightly overlap the embossed white card stock.
Now, stamp the Big Heart stamp onto white card stock 3 times using Versafine Clair Nocturne ink. Fussy cut the images and fold each of the hearts in half. Adhere the first heart down on the inside of the folded square, on the left side, fold-side of the heart in the middle of the folded square.
Then, adhere the next folded heart on the inside of the folded square on the right side. And adhere the last heart in the middle of the card between the 2 other hearts. All of the curves of the hearts should match up perfectly when you open the folded square, and should fold flat when you close the folded square.
Close the folded square and tie it closed so the opening is a secret!!

Isn't this card SO MUCH FUN?!!? I love interactive cards!!

This idea is even sweeter because you can include some fun pens or colored pencils for them to color the Big Heart image!!

The last card that Wendy designed was made with the new Raining Hearts stamp from Altenew and this Caps Lock Love die-cut from Taylored Expressions

To make the card:

Use a piece of grey card stock as your card base
Place a piece of decorative handmade paper on the front of the card base and adhere it with double-sided tape. Wendy chose a geometric paper that has black, gold, and white colors in it.
Take a strip of Stardream paper, Ice Gold color, and stamp the Raining Hearts stamp across the paper. Emboss with Detail Gold embossing powder
Then, take the same strip of paper and die-cut the word "Love" out of it using your home die-cut machine and the Caps Lock Love die-cut. Adhere the strip of paper with "Love" cut out onto a piece of Stardream Antique Gold paper. Then, adhere the entire design onto the front of the card (on top of the handmade paper) using double-sided tape.
Use the L, O, V, and E from the above die-cut and use Nuvo Deluxe Adhesive to adhere the letters inside the card.

What a fun card this is!!! I LOVE how the inside is the cut-out from the front of the card!!

Join us for the next Tuesday with Wendy card making class!!

It will be offered on January 22nd! 11am, 1:30pm, or 6:00pm.. the same class is offered 3 times during the day.

Give us a call to sign up ahead of time!! 360-647-9663

Tuesday with Wendy, Dec 4th

12/4/2018

This week's Tuesday with Wendy cards are SO MUCH FUN for this time of year!!

Check out how exciting they are!!!

The first card that Wendy designed was inspired from this Paper Rose Stamp Set, Cozy Christmas as well as this die-cut from Taylored Expressions, Birch Tree Border

To make the card:

Use your home die-cut machine to cut out the Birch Tree Border from ivory card stock and cut a snow drift (for the bottom of the card) using a pair of scissors to cut a nice snow drift
Use Nuvo Deluxe Adhesive to adhere the tree and snow drift in place
Use the Versafine Clair ink, Nocturne, to stamp the little animals from the Paper Rose stamp set. Wendy arranged the animals in a cute way... I LOVE how she perched the little bird on the hat of the little bear!!
Stamp the little Snowflake image with Hero Arts White Ink around the tree.
Use Prismacolor colored pencils to color in the little images from the stamp set, like the little bears, birds, and owl
Finish off the card by applying Marvy Liquid Applique along the branches of the tree. Use a heat gun to dry the Liquid Applique and watch as it raises and puffs.. making it look JUST LIKE SNOW!

LOOK HOW CUTE this card is!!!!

Not only are the little animals so cute, but this card is great for the Winter Season!!

Check out how one of the gals colored their images... I LOVE IT!!!

The next card Wendy designed was inspired from this tree design from Penny Black, Christmas Foliage and this ADORABLE die-cut set from Impression Obsession, small birds

To make the card:

Wendy used the Tim Holtz Stamp Platform to apply the Versafine Clair inks to the Tree image.. She applied the Rain Forest ink to the foliage part of the tree and the Pinecone ink to the trunk of the tree.
Stamp the image onto ivory card stock
Cut out the Little Birds die-cut (from Impression Obsession) out of black card stock and arrange the birds on your tree in an appealing way. Use Nuvo Deluxe Adhesive to adhere the birds to the tree

The last card that Wendy designed was inspired from this new stencil from Kaisercraft, Sea Urchins and this Sea Urchin stamp from Fred B. Mullett

To make the card:

Use the new Seashell Wide Washi Tape from Altenew and adhere a strip along the left side of the card base
Wendy cut out a piece of background paper for the right side of the card (she chose a paper from the Kiasercraft Deep Sea Collection, Anemone) and stamped the Sea Urchin Stamp using the Versafine Clair ink, Monarch. Wendy stamped the Sea Urchin image several times on the background paper. Use double-sided tape to adhere the paper down.
Next, take a piece of white card stock and rip the edges to make it look distressed. Use the new Picket Fence Large Blending Brushes to apply Distress Ink to the piece of card stock. Wendy used Distress ink colors Wilted Violet and Broken China. The new Blending Brushes are SO SOFT and work great for applying a soft layer of ink.
Use a Palette Knife to apply some Light Molding Paste to the Silicone Craft Mat to create 2 piles of paste... one is colored with Violet ColorBurst and the other is colored with Ultramarine Blue ColorBurst
Use the Light Molding Paste and the Sea Urchins stencil to apply a thin layer of the Light Molding Paste to the SAME piece of ripped card stock.
Sprinkle some Multi Crystal Glitter Mix to the Sea Urchin-stenciled paste while it is still wet.
Put a piece of the the Gold Mesh Ribbon in the middle of the card and use The Ultimate Glue to adhere the ripped strip of paper on top of everything.
Stamp the Sea Urchin stamp onto teal card stock and heat emboss with Detail Gold Embossing Powder. Fussy-cut the Sea Urchin image and use Mounting Tape to adhere the Sea Urchin image so it adds dimension

Just look HOW FUN this card is!!! We love how artistic it is... and the movement of the Sea Urchin throughout the card is just PERFECT!

One of the gals in class decided to sprinkle on the Detail Gold Embossing Powder on top of the wet Molding Paste and used a Heat Gun to heat-set it. The effect that is created is called the "Molten Lava" effect... and although this technique was not taught in class... it still looks SO COOL for this card!!!

Join us for the next Tuesday with Wendy!! It will be offered on December 18th.

Give us a call to sign up!! 360-647-9663

Tuesday with Wendy, Nov 20th

11/23/2018

This week for Tuesday with Wendy card making class, Wendy was inspired by the winter and holiday images!!!

Check out the 3 cards and FALL IN LOVE because they are just fantastic!!

The first card that Wendy designed was inspired from this Stampscapes image, Pines and Rocks as well as this die-cut from Poppy, Magnificent Moose

To make the card:

Start out by selecting a metallic paper to cut out your Moose die-cut and frame from. Wendy chose this marbled card stock that has a gold/champagne color to it.
Use the Hero Arts Rounded Rectangle die-cut set to cut out a rounded rectangle out of the marbled card stock paper. Use the inside piece of the cut-out to then cut out your Moose
Use The Ultimate Glue to adhere a piece of Acetate to the back side of the rounded rectangle cut-out
Stamp the Pines and Rocks image using the Versafine Clair ink, Rain Forest
Use Mounting Tape to adhere the Rounded Rectangle to the paper that has the Pines and Rocks image stamped on it.... This will create dimension for a shaker card *PLACE SEQUINS INSIDE THE SHAKER CARD* before you adhere it completely!!!
Layer the card with solid green card stock and paper with pinecones on it for the patterned paper.
Mount the design onto the front of your card base, which is white card stock

**Look below, to see how one of the gals cut out a second moose to make it even MORE FUN!**

Just look how fun this card is!!

And the best part is... it's a SHAKER CARD!!! (Which is just so fun... whether you are making a card for kids or adults)

This design is great for cards for men or a card for the Hunter in your life... and the patterned paper is PERFECT for the Pacific Northwest

The next card that Wendy designed was inspired from this Stampendous image, Snow Bird

To make the card:

Stamp and heat emboss the Snow Bird image with Versamark ink and Moonstone Embossing Powder
Color the image using Prismacolor colored pencils... Wendy chose 3 tones of light brown to add some tone-on-tone color to the Snow Bird
Layer the image with the light brown marbled paper and mount the image onto the embossed handmade paper and adhere it using The Ultimate Glue
Adhere the design onto the front of your card base. Wendy chose an ivory colored card stock as the card base
As a final touch, use Nuvo Crystal Drops, Ivory Seashell, to add some berries onto the Snow Bird branch.. the color and texture mimics the embossed handmade paper perfectly!!!

What a stunning card!!! Such a perfect image for the winter season..

The last Card that Wendy designed was inspired from this stamp and die set from Spellbinders, Christmas Joy and this die-cut from Poppy, Whittle Moose

To make the card:

Use the Hero Arts Infinity Circles die-cut set to cut out 2 sizes of circles. Use a dark brown card stock for the larger circle and a decorative paper for the smaller circle (for this card, Wendy chose this whimsical tree paper from Photoplay and it is SO CUTE)
Stamp your Christmas Tree with Versafine Clair ink, Rain Forest
Color your Christmas Tree with light green and yellow Tombow Markers. Then use the Christmas Tree die-cut to cut out your tree
On your green card stock base, adhere a small strip of dark green card stock in the middle to add color contrast
Use double sided tape to adhere the layered circles on the right side of your card
Die-cut the Whittle Moose out of brown suede paper and use Nuvo Deluxe Adhesive to adhere the Moose to the middle of the layered circles
On the left side of the card, use pop-dots to adhere the stamped Christmas Tree image.
At the top of the card, stamp the Christmas sentiment in Versafine Clair ink, Rain Forest
Finish off the card by tying a bit of red polka-dot ribbon along the left side of the card and tie a little knot to hold it in place

This Christmas card is JUST ADORABLE!!!!

I love the colors, the movement, and how the tree paper matches the tree stamp perfectly!!

Fantastic cards this week!!!

To sign up for the next card making class, give us a call here at the store!!

The next card making class will be offered on Tuesday, December 4th
*Please sign up by the Saturday before class*

360-647-9663

Tuesday with Wendy, Nov 6th

11/10/2018

Check out how wonderful the cards are this week!!! Wendy decided to make Winter/Christmas cards for this series.. and I just LOVE them as a set!!

The first card Wendy designed was inspired by this die-cut image from Impression Obsession, Deer Frame

To make the card:

Use your home die-cut machine to cut out the Deer Frame from Brown Stardream card stock
Mount the image onto patterned paper (Wendy used the paper that had a Holly pattern on it)
Use a couple pop-dots behind the deer's head to add dimension. To adhere the rest of the Deer Frame, use Nuvo Deluxe Adhesive
Layer the image with a bit of red card stock and mount it all on to your card base (ivory card stock)
Use a bit of decorative ribbon and tie a little ribbon around the neck of the Deer. Wendy used a nice green and red gingham ribbon
Lastly, use Nuvo Crystal Drops, Red Berry, to add a nose onto the deer!! Now your Deer is Rudolph the Red Nose Reindeer!!

What a fun card!! I love the addition of he red nose!

This die-cut is such a stunning image.. could be used for a variety of different cards!

The next card Wendy designed was made using this absolutely GORGEOUS stamp set from Hero Arts, Color- Layering Poinsettia

To make the card:

Start out by stamping the Poinsettia. This is a color-layering stamp set, meaning you will stamp the images in a "layering" fashion to achieve a desired effect. Stamp the poinsettias onto Solar White card stock
Stamp the BOLD images first in light colored ink and the detail images last in darker colored ink
Use the color Pallet Listed Below
- Poinsettia: Distress Oxide Worn Lipstick, Versafine Clair Galmorous, Versafine Clair Chianti
- Leaves: Distress Oxide Peeled Paint, Versafine Clair Rain Forest
Once you have stamped-out the Poinsettias, fussy cut along one edge to make them stand out a little more
Use double-sided tape to adhere the stamped poinsettia images to the right side of your card base (red card stock)
On the left side of your card, adhere a piece of decorative holiday paper. Wendy chose this paper that has poinsettias in it to replicate the movement and theme of the Poinsettia Stamp we used.
Add a bit of red ribbon down the middle of the card, giving separation between the decorative paper and the stamped poinsettia images
On a brown tag shape, stamp out a nice sentiment, Wendy stamped "Merry Christmas" with Versafine Clair Rain Forest ink
Tie a bit of green twine through the tag and tie it around the red ribbon on the card
Use a pop-dot to adhere the tag to the front of the card

What a BEAUTIFUL Holiday Card!! This is so sweet and the paper really ties in with the Poinsettia Stamp!!

The last card from this series was designed using this Snowflake Turnabout Stamp from Concord & 9th

The idea with "Turnabout" stamps is that you can stamp the same image 4 times with a different color ink each time... just turning your paper 90 degrees after each stamp.

Below you can see the idea and effect of using a Turnabout Stamp:

To make the card:

Wendy used the Tim Holtz Stamp Platform and placed the Turnabout Snowflake Stamp onto the platform
Wendy created a template for this stamp. The template below shows where you lay your square piece of card stock (4" x 4" white card stock)
Create a template by lining out a 6" x 6" area that the stamp takes up
Measure out a nice 4 1/2" x 4 1/2" square in the middle of the 6" x 6" template
In the middle of the 4 1/2 x 4 1/2" template, that is where you will lay your card stock to stamp
Ink up the Snowflake Turnabout Stamp and stamp it on your paper using Versafine Clair Warm Breeze ink
Lift up the stamp platform and ink up your stamp again with Versafine Clair Twilight ink, and rotate your paper 90 degrees MAKING SURE to keep it in the middle of your template
Continue to stamp and rotate until you have coated the entire piece of card stock in snowflakes

Then, take the paper you just stamped and mount it onto the front of a blue card base, leaving space at the bottom of the card
Stamp out a sentiment (Wendy chose "Snowflake kisses and Holiday wishes" from the Concord & 9th clear Turnabout Stamp set. She stamped the sentiment in Versafine Clair Twilight ink onto white card stock and mounted it onto blue card stock for color contrast
Mount the sentiment onto the snowflake background image at a slight angle and adhere with pop-dots
Take a piece of white card stock that measures 8 1/2" x 3" and cut a wavy edge along one of the long sides. Then cut the paper in half. You just created 2 snow drifts
Place the snow drifts along the bottom of the card, using pop-dots to add dimension to the snow drift on the very bottom of the card
To finish off the card, Wendy used Star Dust and Crystal Stickles along the edge of each snow drift
Lastly, Wendy used patterned paper with bears on it and fussy-cut a few polar bears. She used pop-dots to adhere them to the snow drifts and made it look like they were playing in the snow!!

I just LOVE how fun this card is!! What a fun idea!

Join us for the NEXT Tuesday with Wendy class!!

SIGN UP AHEAD OF TIME by calling the store!!

Tuesday, November 20th

360-647-9663

Tuesday with Wendy, Oct 23rd

10/26/2018

We have been busy creating new things here at the store! Check out the newest cards Wendy designed for her last card making class!!!

The first card that Wendy designed was made using this snowflake die-cut from Penny Black, Crystalline as well as this stamp set from Lawn Fawn, Winter Scripty Sentiments

To make the card:

Start out with a white card stock card base. Select a piece of Handmade Paper 4" x 4" (Wendy used this iridescent blue/green paper that looks like ice!). Use double-sided tape to adhere the paper to the front of the card base.
Next, cut a piece of navy card stock that measures 3" x 3" and adhere that to the front of the Handmade Paper
Take 2 pieces of Stardream TEXT WEIGHT paper that both measure 3" x 3". Wendy used Stardream Ice Gold paper. Stack the 2 Stardream papers together and die-cut the Crystalline Snowflake out of the papers at the same time
Then, use Nuvo Deluxe Adhesive to adhere ONE of the snowflakes completely to the front of the navy card stock
With the second snowflake, press the Versamark ink pad to the snowflake until it has clear ink all over the snowflake. Sprinkle on Star Dust Embossing Powder and heat-set it with a heat gun
Use Nuvo Deluxe Adhesive to adhere the CENTER ONLY to the other snowflake and curl up the ends of the snowflake to add dimension
Then, take 6 strips of paper (1/4" x 8 1/2" for each strip) and curl each strip into a little circle.. this is called Quilling. When you have completed your curl, use Nuvo Deluxe Adhesive to hold the curl in place.
Then attach the coils to the center of the snowflake on your card and adhere the coils with Nuvo Deluxe Adhesive
Finish off the card by stamping a sentiment from the Winter Scripty Sentiments along the bottom of the card using Versafine Clair ink, Twilight

I LOVE how this card turned out!! Just look at this DETAIL!!!!

The next card was SO STUNNING and is absolutely perfect for a Thanksgiving card... It was made using these stamps:
Winter Still by Penny Black
Grateful Hearts by Impression Obsession

To make the card:

Wendy started out by taking a piece of ivory card stock and stamping out the Grateful Hearts sentiment using Versafine Clair ink, Chianti
Then, Wendy inked up the Winter Still leaf image by tapping on the different colors of ink. Use Distress Ink starting with Rusty Hinge, then Aged Mahogany, then Peeled Paint.. making sure to tap and gently massage the ink into the stamp
Then, stamp out the Winter Still leaf image onto the ivory card stock, overlapping the leaf image with the sentiment just slightly.
Then, layer the ivory card stock onto a card base.. Wendy chose this beautiful fall-tones color that matched with the Rusty Hinge ink color PERFECTLY

I love how this card turned out! Such a quick technique with BEAUTIFUL results!!!

Mary McClary (one of the gals from class) said she accidentally messed up on her card!! But, clever as she is.. she used some of the quilling papers to make it BETTER!!!

Well, I just LOVE that!!

The last card of the series was inspired by this STUNNING image from Impression Obsession, Deployed

To make the card:

Stamp out the image in Versafine Clair ink, Medieval Blue onto white card stock
Use a Blue Tombow Marker to color onto a craft mat and use a Waterbrush to pick up some of the color. Watercolor your image giving light and dark tones to create depth
Use a pair of scissors to fussy-cut around the image.. cut around the head and around the feet so that it looks like the soldier is walking away
Mount the image on a piece of red card stock and apply mounting tape on the back
On your card base, use red-white-blue decorative card stock and put one pattern on the left and a corresponding pattern on the right
Adhere the soldier image onto the card front using the mounting tape so it has a little bit of dimension

This card is GREAT for anyone who may be Serving our Country or a Veteran of War... it is just a FANTASTIC card

I love how this card has the idea of a 3D card without having to do a lot of extra fussy-cutting

What a GREAT series of cards this week!!!

If you would like any of the items listed above, please give us a call at the store!

To sign up for the NEXT card making class on November 6th, give us a call!
You only need to bring double-sided tape and scissors to class, but you MUST register by the Saturday before class!!

360-647-9663

Tuesday with Wendy, Oct 2nd

10/7/2018

This week for card making class, Wendy was inspired by Fall images!!!

Check out this week's grouping of cards!! Aren't they WONDERFUL?!!?

The first card Wendy designed was made using this Spiderweb Stencil from Taylored Expressions and the Spider Trio die-cut and Happy stamp both from Impression Obsession

To make the card:

On a piece of black card stock, lay the Spiderweb stencil in place and use Versamark ink (ink pad side down on the stencil) and apply the ink across the entire spiderweb image
Lift away the stencil and apply Detail Black embossing powder across the entire piece of black card stock, coating the spiderweb image in embossing powder. Heat-set the image
On a smaller piece of black card stock, stamp the Happy stamp with Versamark Ink and heat emboss with Detail Black embossing powder. Layer a piece of silver paper behind this image too and mount that on top of the spiderweb image
Next, die-cut one of the spiders from the Spider Trio (Wendy picked the biggest one!) out of Black Glitter card stock
Pick out a fun-colored sequin to embellish the spider and use Nuvo Deluxe Adhesive to adhere the sequin to the spider.
Place a pop dot on the underside of the spider, then place a piece of small silver twine underneath the pop dot and THEN adhere the spider to the front of the spiderweb image.. you can have the spider crawling over the sentiment if you want!
Then, tuck the silver twine behind the black card stock and use some double-sided tape to hold it in place.
The card base is a piece of ivory card stock. Layer the spiderweb image with a piece of text weight silver paper and mount it on the card base using double-sided tape

EEEE!!!! What a FUN CARD!!!!

The NEXT 2 CARDS are made using the new Tim Holtz Lift Ink and this beautiful image, Windswept Leaves from Impression Obsession

Now, I know I have posted this video before, but for those of you who are unfamiliar with how the new Lift Ink works, I highly recommend watching this video!!

Tim Holtz begins to explain about the new Lift Ink at minute 26:00

To make the cards:

USE GLOVES and GRUBBY CLOTHING when doing Alcohol Inks because they can be messy!!!
Take a little bit of Alcohol Blending Solution and float it on a small piece of YUPO paper
Use a few Alcohol Ink colors and apply just a drop or 2 of each color onto the YUPO.. watch as the vibrant colors flow and move across the paper.. WOW!!
Use a heat-gun to heat-set the Alcohol Ink colors

Then, once your alcohol ink image is COMPLETELY DRY, apply the Lift Ink onto the Windswept Leaves image.. (your stamp should be VERY CLEAN before you start because you don't want to transfer any old ink into your Lift Ink Pad)
Stamp the Windswept Leaves image with Lift Ink directly onto the YUPO paper right on top of the Alcohol Ink background you created.
THEN stamp directly onto a piece of white card stock.. and watch as the color of the Alcohol Ink background is now the color your Windswept Leaves are!!!
NOW take a CLEAN piece of paper towel and DAB the ink off the Alcohol Ink background.
Once you have dabbed off the Lift Ink, take a clean piece of paper towel and BUFF out the Windswept Leaves image.. and don't gasp too loud because the effect is REALLY AMAZING!!!

You will now have 2 separate Windswept Leaves images.
One of the images is layered with a bit of green card stock and some bright purple handmade paper and mounted onto a soft green card stock base
The other Windswept Leaves image is layered with a bit of ivory card stock, dark brown card stock, and mounted onto a light brown card base. Wendy added a touch of textured ribbon on the side of the card to add some interest.

Aren't these cards STUNNING?! I just love how they compliment each other!!

If you want to join in all the fun by participating in the NEXT Tuesday with Wendy class, give us a call!!

Tuesday, October 23rd

Choose the time that works best for you!
11am -- 1:30pm -- 6pm

PLEASE SIGN UP BY THE SATURDAY BEFORE CLASS!!!
360-647-9663

Tuesday with Wendy, August 28th

9/1/2018

What a fun class this week!! These cards are all SO MUCH FUN and the students learned new techniques ... Check out these fantastic cards and fall in love!!

The first card Wendy designed was made using this stamp set from Darkroom Door, Grevilleas, this STUNNING Handmade Paper with this metallic flourish, and this Peace Script stamp from Impression Obsession.

To make the card:

Use an metallic ivory card stock as your card base.
On the left side of the card, layer a piece of Handmade Metallic Flourish Paper on top of a piece of text weight Gold Leaf metallic paper, leaving a nice border of gold on 2 sides of the metallic flourish. Use double sided tape to adhere the papers together
Use Morning Mist Versafine Clair Ink to stamp out the Grevilleas stamp.. Wendy chose the image that looks like a pine sprig. She stamped the image so it partially stamped where the metallic flourish paper is so that it looks like it is coming out of the paper. She stamped this image twice.
Wendy then stamped the Peace Script stamp, also in Morning Mist Versafine Clair ink.
Then, she applied Detail Gold embossing powder over the 3 stamped images and heat-set it.
To finish off the card, Wendy used a bit of fiberous gold twine and tied it around the edge of the card... I LOVE how the fiberous twine mimics the movement of the pine sprig stamp!!

This is such a BEAUTIFUL card for the holidays!!!!

The next card was ALSO inspired from the Darkroom Door, Grevilleas stamp set, as well as this Carabelle Studio stencil, Mask with Wires, and this Avery Elle stamp set, Grateful

To make the card:

Start with a piece of cardstock 4" x 5 1/2". Wendy chose a very soft, light colored brown paper
On the smooth side of the paper, stencil the image Mask with Wires
Use the Versafine Clair inks Charming Pink, Verdant, and Golden Meadow with the Nuvo Blending Sponges to apply inks over the stencil
Stamp the sentiment, Grateful, in Black Versafine Clair ink
Stamp the native plant sprig along the bottom edge of the card, also in Black Versafine Clair ink
Apply Detail Clear Embossing Powder across the entire piece of card stock and heat-set
Use a narrow piece of black card stock (1/8") on either side to frame out the image on the front of a Speckletone Kraft card stock base

This card is SO FANTASTIC!! It is even more amazing in person!!! It also makes for a great Thanksgiving card!!

The last card is actually a Shadow Box Card!!! Wendy was inspired by this adorable House Mouse image, Acorn Cap from Stampendous, and the Avery Elle stamp set, Grateful

To make the card:

Your card base is going to be the base of the Shadow Box
Cut your card stock so it is 4" x 11" . Wendy used Astroparche card stock
Score your card stock at the following points: 1/2" , 1 3/4" , 5 3/4", and 7" (look at the score guide below)

Then, using double-sided tape, adhere a piece of decorative card stock on to the large panel in the middle of the card base. ONLY USE TAPE AROUND THE EDGE. The decorative card stock measures 4" x 4"
Use the Hero Arts Rounded Rectangle die-set to cut out a window through the decorative piece of paper you just put on. This will cut through the front of the shadow box as well.
The piece of decorative card stock that cut out from the die-cut can be taped down on the far side of the shadow box.
On the piece of Astroparche card stock that cut out from the die-cut, stamp the sentiment Thankful with the leaves and acorns in Versafine Clair Inks Chianti and Rain Forest. Watercolor the leaves and acorns using Tombow Markers and water brushes. Adhere this to the far side of the shadow box as well, just off-set from the Decorative Paper that is already there. Use Pop-dots to adhere the sentiment down.
Stamp the House Mouse image, Acorn Cap, in Versafine Clair ink Pinecone, and emboss with Detail Crystal Embossing Powder. Watercolor the mice and acorns using Tombow Markers and water brushes. Fussy-cut the image
Next, cut a narrow piece of Astroparche paper. The strip should measure 1/2" x 5".
Score the strip at the 1/2" mark on both sides of the strip so you can put it in the shadow box.
Tape the Acorn Cap image onto the strip so it will sit upright in the shadow box. THEN tape the strip in place by applying tape to the 1/2" tabs ONLY and adhere it inside the shadow box.

I LOVE this Fall Shadow Box!!!

And the best part about Shadow Boxes... They fit nicely into an envelope!!

If you would like to join us for the next Tuesday with Wendy class, it will be offered on Tuesday, September 11th

Give us a call here at the store if you'd like to sign up!! 360-647-9663

ALL NEW Memory Box!!!

8/28/2018

YIPPPEEEEEE!!!!

For those of you you who LOVE Memory Box die-cuts, you will be pleased to hear we have some of the newest designs now in stock!!!

Just look how STUNNING these images are!!

Now these designs are going to go quick... so swing in soon to see just how WONDERFUL they are!!!

We are open 7 days a week!

Give us a call if you would like something shipped to you, we are happy to accomodate!!

360-647-9663

Hand Punches

8/17/2018

In the world of card making, there are SO MANY THINGS you can do!!

Many years ago, Hand Punches were widely used... but as die-cut machines became more popular, less and less people used punches... but we STILL carry them... and you can still make PROFESSIONAL looking cards with minimal effort!

Just look at some of these AMAZING designs!!!

You can use this Pumpkin Punch to make a cute card using scraps of orange paper!!

I LOVE this card idea using the Spiderweb punch and this Handmade Paper with the similar movement!!

Looking to make a Halloween Invitaion? This Halloween Icons Punch makes it easy to create a quick card decoration AND doubles as creating chunky confetti for the table!!

We love this idea using this Large Edger Punch and then pairing it with orange and copper tones to make a nice Fall card..

This is a Punch around the Edge style and it gives you the option to make a beautiful focal point for ANY card!!

Just look how elegant this Wedding card is..

You can use this Punch all over the Page style of punch to punch out snowflakes from the center of a card an back it with glitter paper!!

I used this sentiment from Penny Black, Joyous Season and made a soft pastel purple card.. despite the unusual color palette, this card is BEAUTIFUL in person!!

We used the Large Edger Punch to make a winter card... again we chose a sentiment die-cut from Penny Black to complete the card

This Edger Punch had an argyle look to it, which worked out perfectly for this Christmas Party Invite

I LOVE this snowflake edger, Skyland Snowflake .. it just gives the idea of a snowflake without it being too overwhelming... perfect for framing out a nice stamped sentiment!!

This Hero Arts stamp set, Color Layering Joy, is PERFECT with this Lattice Punch that we cut out of Red Mirricard paper and paired with gold and cream tones..

This really is a stunning card!!

Stop by to see us 7 days a week to see what we've been making and working on around the store!!

If you see something you MUST have, give us a call!!
360-647-9663

NEW STUFF!!!!! August 2018

8/12/2018

Who is ready to see all the COOL NEW STUFF?!?!!

First up, EVERYONE has been LOVING the new Tim Holtz Lift Ink!!

If you are curious why we love it SO MUCH, check out the video!!

http://timholtz.com/new-alcohol-ink-products/

(hint: to learn how to use the Lift Ink ONLY, fast forward to the 26:00 minute mark in the video above!!)

And...... wait for it... wait for it....

ALCOHOL INKS ARE BACK IN!!!!!!!!!!!!!!

Of all the packs of Alcohol Inks that Ranger carries.. we brought in 18 out of 20 of the available packs!!

That is an ENTIRE SECTION of Alcohol Inks to feast your eyes upon....

For those of you who love

Stamps
Die-cuts
Stencils....

... there are new things in stock for you too!!!!

Raise your hand if you LOVE Halloween!!

Now raise your OTHER hand if you LOVE Taylored Expressions!!

Well, check out HOW CUTE THESE ARE!!

I love this new little Vampire Die-cut that curls around to hold a candy!!!

For those of you who love little witches... LOOK HOW ADORABLE!!!

For a fun Halloween idea.. get candies and goodies from the store and label them with this BRILLIANT stamp set, Pick your Poison, from Taylored Expressions!!!

This Falling Leaves Cutting Plate can be used as a frame OR turned into a gate-fold card!!!!

The little leaves come with the set.. and with this new sentiment set, you will have the PERFECT Thanksgiving card... just in time for Fall!!!

Speaking of Fall... MORE PAPER IS HERE!!!!

Fall
Halloween
Christmas!!!!

There are more new products on the way in as well... just stop by 7 days a week to see what might catch your eye!!!

See you soon!!

360-647-9663

NEW STUFF!!!!!!!

7/6/2018

Just earlier this week, we got in a HUGE order of new stuff!!!!

We LOVE looking at all the goodies.. and we know you do too!! Here is a sneak peek of some of the newest things we've been getting in...

First off, if you haven't seen the new Hero Arts release, you will want to see some of these WONDERFUL designs!!

Yes, yes.. it's here already!! CHRISTMAS and HOLIDAY stamps!!!

For those of you starting to work on your Christmas Cards, now is a great time to stop by and get inspired!! It seems like the holidays sneak up on us SO FAST.. why not create less stress for yourself by starting early? We are here and happy to help if you hit a snag!!

Also, check out NEW PAPER!!!!!!

With Florals and Ocean themed images from Kaiser Craft and Couture Creations ... you will find something to love!!!

Of course, it wouldn't be summer without *new* Summer Die-Cuts!

We love these Under-the-Sea images and the Sailboat!!

This floral die-cut is BEAUTIFUL and perfect for any wedding or anniversary card you may be making.. this is SUCH A GREAT DIE-CUT!

We cut it out in Gold Mirri Card paper to show you just how stunning this image is!!

We LOVE planners around here.. and we especially love making our own planners!!

These new stamp sets are AMAZING!!!! We just love all the little illustrations and words!

This makes it easy to design your own planner or make your journal just WAY MORE FUN!!

Just look at these cute little banners! And did you see the little kitty on the edge of the paper?!!? ADORABLE!!

For those of you who LOVE to paint, collage, and create... check out these new products!!

This Collage Paper is thin and decorative.. ideal for layering and working with in your altered journals or any other collage you may be doing! We also got in the SET OF 6 Water Brushes from American Crafts

We just LOVE these designs in this Collage Paper pack!!!

For those of you who LOVE glitter, the Glitterific Acrylic Paints are back in!!!

And.. I know you are all waiting for them to come back in... the Alcohol Ink Storage Tins are also back in stock!!!!

Remember when Wendy designed this card using Distress Inks and the Resist Spray?! Well, the Fern Embossing Folder she used to make this card is also back in!!

If you saw something that you MUST have, give us a call!

360-647-9663

Tuesday with Wendy, Jan 30th

1/30/2018

This week for Tuesday with Wendy, it was ALL about Valentine's Day!

Wendy designed these 3 *BEAUTIFUL* cards...

This first card is made using a Sizzix embossing folder, Rosettes.

I LOVE her combination of the swirl background paper and the way she layered the hearts.. This die cut is Glorious Hearts and is made by Memory Box, Open Studios

Once the hearts have been cut-out and embossed, Wendy used the Nuvo Mousse and did a Rub-n-Buff to bring out the texture

What I love about this card is.. in different lighting it has a different effect! VERY COOL!

We LOVE this mousse!! So easy to use.. stop by and see for yourself how *brilliant* this product is!

The next card Wendy designed was using the Double Tack product, a bit of lace, and glitter!!

You can make ANY die-cut shape glittery with just a little bit of effort.. but gosh this effect is BEAUTIFUL!!

Double Tack is a VERY tacky sheet of double-sided adhesive and works just PERFECTLY for this technique! We have several samples of this idea currently up in the store, stop in to see them in person to really see the full effect!!

The last card that Wendy designed was this one using the new Coffee Stamp set from Altenew, Coffee with a Splash

Using some different shades of brown ink, Wendy created "Background Paper" ...

Then, Wendy cut out one heart. Then cut out a second heart this time NOT CUTTING IT OUT COMPLETELY

I LOVE the way this card folds to reveal a secret heart on the inside!!

The sentiment here works PERFECTLY if you are a Coffee-Lover! "I love you more than the first cup of coffee" .. How sweet is that ?

Wendy makes just FANTASTIC CARDS every time she teaches class.. and they are ALWAYS different!!

Give us a call to sign up for the next class, February 13th!

360-647-9663

White Embossing and Watercolor Resist

1/20/2018

We had TONS of fun at Demo this week!! Elli was the demonstrator and we learned all sorts of fun ideas to do with White Embossing Powder and Watercolor Resist.

The technique:

Stamp an image with Versamark Ink onto white paper, cover the image with White Embossing Powder, shake off the excess, and heat set the image using a Heat Gun.

What you are left with is just a glossy-looking image on white paper.

--NOW THE FUN PART--

You can use a variety of different kinds of watercolor products to "Reveal" the image ..
Below are the most popular watercolor products we carry

Distress Watercolor Crayons
Standard Watercolor Set
Colorburst, powdered Watercolors

Elli pre-stamped and embossed several images and then used a variety of different watercolor techniques to make the images *come to life*

The Distress Watercolor Crayons are a fun one...

How to make the Card:

Stamp and emboss in white on white card stock. Just color across the page, coloring over the embossed image, and then use a wet paper towel or baby wipe to swipe across the paper.. the colors magically blend together and your image appears!

The little Girlie Bot stamp below is from Impression Obsession and is *BRAND NEW*

We carry several sets of Distress Watercolor Crayons.. just pick a stamp and a favorite crayon set and you've got yourself an easy card with a GREAT appearance!

One of our FAVORITE watercolor products to use is Colorburst. This powdered watercolor is activated with water.

To make the card:

Stamp and emboss in white on white card stock. Spritz the paper with water, sprinkle Pthalo Green, Indigo, and Ultramarine Colorburst on the paper, spritz more water, and WATCH THE FEATHERS APPEAR!!

The stamp shown below is Two Feathers and is made by Stampotique

This is one of the easiest ideas for doing watercolor with white emboss resist..

Stamp the image or images on white card stock and emboss with white powder. Then, do a quick "Watercolor Wash" over the entire paper and then, using the SAME COLORS as you used for the wash, color in the image. This will make the image stand out and appear darker while it also matches the background it's on.

If you notice on the heart image above, there is a distressed white border.. this is ALSO done with white embossing powder!

To make the card:

Rub the edge of the Versamark Ink Pad around the edge of the paper. Then, stamp your desired image in the middle. Apply white embossing powder to the entire image and border, then heat-set. Finally, use a standard Watercolor Set, use 2 shades of red to do a light watercolor wash, and then detail watercolor the heart.

This next card is SO EASY to make but looks STUNNING all by itself!! This is done by just using a standard Watercolor Set in rainbow order.

This leaf image is just BEAUTIFUL! I Love this sentiment as well..

Shown are the images Simple Things and Wispy Leaves Large which are both stamps by Impression Obsession

Check out this idea!

Elli wanted to create a crescent moon... easy enough to do if you have a circle punch! Cut out the circle, then scoot it over the cut-out and tape back down! Now you have a crescent moon stencil!

To make the card:

Trace the moon using a Versamark Pen onto white card stock and color in the moon using the same pen. Stamp the Boy Swing image below the moon and then emboss with white embossing powder the entire image.

Use Colorburst to make the background. Once it is dry, flick Bleedproof White ink across the paper to make the appearance of stars in a galaxy!

There are SO MANY THINGS you can do with this technique!!

Secret Messages!

Themed Cards!

Valentine's Day ideas!

We offer Free Demo EVERY WEDNESDAY! The theme is always different..

The group of gals who attend each week are such a hoot.. we have a great time EVERY week.. come join us for the NEXT Demo, Wednesday January 24th as we demonstrate ideas with Alcohol Inks!

Questions?!? Give us a call anytime!
360-647-9663

Demo: Mini Envelopes

1/4/2018

This week for Demo, Bekah was the Demonstrator and she showed us *ALL SORTS* of fun ideas using the Mini-Envelopes!

We have a HUGE selection of these adorable little envelopes.. stop by to see us to check them out!!

Bekah revealed all kinds of ideas.. and I just HAVE to share them with you!!

Look at how easy these are!! Bekah loved the idea of making a *mini album* and expanded on that idea by also making a *mini accordion book* !!! HOW CUTE IS THAT!?!?

I love her use of the little fortune cookie stamp!!

She got really creative with this one... what a SWEET idea!!

This little house has a removable roof!
Great for hiding a little piece of candy!!

This idea is ADORABLE!! Bekah made a *mini- shaker card!* using a small die-cut from Memory Box, a little piece of acetate and some glitter and sequins!! I LOVE THIS IDEA!!!

Then, again using Mini-Envelopes, she also made this "Z-fold card" .. LOOK HOW CUTE!!

Now.. I just have to share with you MY FAVORITE IDEA from Demo this week!!!

This little gift-tag set!!!!!

We used the store's die-cut machine to cut out this folded envelope.. and filled it with goodies!!!

Check out how fun this is!!

Different sized envelopes for cards
Mini-envelope to hold gift-tags
A little arrow with extra twine
Another mini-envelope to hold small stamps
A place to hold a pen

And I just love that the entire thing folds up! This is *such a cute* gift idea!! I LOVE all the little bits and pieces!!

With Valentine's Day just around the corner, this is a GREAT time to start thinking of gift ideas for your Gal friends or your Sweet Heart.. and we are HERE TO HELP!!

Lots of new products just got unloaded.. swing by to see for yourself!!

We are open 7 days a week!!

360-647-9663

Tuesday with Wendy, Dec 5th

12/12/2017

The last Tuesday with Wendy class was a LOT of fun!! The theme for this week was embossing techniques!!

To start, Wendy designed this AMAZING New Year's card!!!!

She used 2 stamps from Hero Arts, Festive Bauble Bold Print and Happy Happy New Year

To make the card:

The card base is 8 1/2 x 5 1/2, folded in half.
Stamp the Bauble Background on a piece of metallic black paper (Cocktail, Black Russian), 2" x 5 1/2, using the Versamark ink pad.
Use a little bit of White Embossing Powder on one part of the image... only apply the powder to a small part closest to the outside edge... and shake off any excess back into the container. REPEAT this step with Gold and Silver Embossing Powder until the entire image has embossing powder on it. This technique is called Multi-Color Embossing. Once you have heat-set the image, tape it down on the front of your card on the left side using double-sided tape.
Place a piece of handmade dot paper, 2" x 5 1/2", on the front of the card on the right side... *make sure to leave about a 1/4" of black paper showing on the far right side of the card*
Place a 1/4" piece of the Gold Glitter Paper in the center of the front of the card to give it nice contrast.
To finish the card, stamp out the Happy Happy New Year sentiment onto a piece of white cardstock (3 1/2" x 1 1/2") do the Multi-Color Embossing again, this time with just Silver and Gold Embossing Powders.
Mount the sentiment onto a piece of Stardream, Gold Leaf cardstock (3 3/4 x 1 3/4).
Use pop dots to mount the sentiment onto the front of the card.

The next card was using the Berry Bramble stamp from Penny Black and Warm Wishes by Verses.

To make this card:

Using the Tim Holtz platform, stick your stamp down and ink it up. On the STEMS ONLY, use the Versafine Olympic Green ink pad. On the BERRIES, use the Versafine Crimson Red ink pad.
Stamp the image onto Classic Crest Natural cardstock
Sprinkle Detail Gold Embossing Powder over part of the image. THEN apply Detail Clear Embossing Powder over the entire image. Heat-set it.
On the same piece of paper, stamp Warm Wishes with the Versamark ink pad. Apply Detail Gold Embossing Powder and heat set it.
Mount the card onto the card base (11" x 4 1/4" on Classic Crest Natural cardstock, folded in half).
Frame the image with 2 strips of 1/8" Curious Metallics, Botanic cardstock AND 2 pieces of 1/2" decorative Christmas paper (Wendy used the new Pebbles, Merry Merry line)

Isn't this card BEAUTIFUL!! (It was BY FAR the most popular card in class)

The last card that Wendy designed is a quick and easy one to put together.. it was also made using the Verses saying, Warm Wishes and the die-cut from Amy Designs, Snowflake Swirl

To make the card:

Wendy used the Majestic Blue Versafine ink pad to stamp out the saying Warm Wishes onto a piece of snowflake paper (Wendy used this piece from the Bo Bunny line, 'Tis the Season)- which measures 3" x 5 1/2"
Wendy then embossed the words with Star Dust Embossing Powder and heat-set it.
She then cut out 2 strips of Blue glitter paper (1/4" x 5 1/2" strips) to frame the image.
Then, using a home die-cut machine, Wendy cut out the Snowflake Swirl from a piece of white cardstock.
Finally, using double-sided tape, she put the card together by mounting it onto the card base: a piece of denim blue cardstock ( 8 1/2" x 5 1/2", folded in half)

I Just LOVED this card!! Despite it being so easy to put together.. it is just Beautiful!!

One of the gals from class came in this week to show us how she decided to use a different sentiment that she had at home.. and I just LOVE it on this card!! She used the SAME technique (Majestic Blue Versafine ink with the Star Dust Embossing Powder) but just used a sentiment she already had.. great idea!!

Tuesday with Wendy, Nov 21

12/2/2017

We have been having a busy couple weeks! I wanted to take a moment to share with you the cards from the last Tuesday with Wendy class!!

Check out how fun these cards are!

Wendy wanted to show some new techniques.. and she did not disappoint!!

The first card, and one of my favorites, was made using this new snowflake stamp from Hero Arts, Handdrawn Snowflakes. This stamp, which is a "cling" style of stamp, is SO BEAUTIFUL!!!

To make the card:

Stamp the snowflake image onto dark blue, iridescent card stock (4" x 5 1/4") using aVersamark ink pad
Apply the embossing powder one color at a time... Start along the edge of the image, apply a little bit of Detail Gold embossing powder to the snowflakes (make sure you don't cover the entire image!), shake off the excess powder and put it back into the container. REPEAT these steps for the 2 other colors of embossing powder, Detail Silver and Detail White, until all the snowflakes have been coated.
After you have applied the embossing powders to the entire image, heat-set it.
Finish off the card with 2 ribbons.. a bit of thin dark blue ribbon and a bit of matte gold ribbon.
Mount the entire image onto the card base which is white card stock (8 1/2" x 5 1/2") folded in half

This card is SO STUNNING!!! An easy technique with BIG results!!

The next card was made using this ADORABLE stamp set from Stampendous, Snowman Trio

To make the card:

Stamp the snowmen images onto white card stock
Color the snowmen using markers or colored pencils

Use the Slider Dies "On the Right Track" from Taylored Expressions to cut-out the slider track. Wendy cut it out of a piece of dark blue snowflake paper (5 1/2" x 3" ) from Reminisce

Take 2 pennies and put a pop-dot on ONE of the pennies

Cut 4 strips of black chipboard (5 1/4" x 1/2"). Make 2 rows of the chipboard so 2 pieces are stuck together and use double-sided tape to adhere them to the UNDERSIDE of the dark blue snowflake paper.

Put a penny BEHIND the slider cut-out and put the penny with a pop-dot on TOP of the other penny. You should end up with 2 pennies with a pop-dot between them that slides across the card.
Mount the dark blue snowflake paper onto a piece of white paper (5 1/2" x 3 1/2")
The card base (11" x 4 1/4") is folded in half, and using the little snowflakes from the Snowman Trio stamp set, stamp the snowflakes along the edge using Majestic Blue Versafine ink.

Tape the dark blue/white paper down onto the front of the card, leaving a little bit of the light blue paper exposed so you can see the little snowflakes peeking out.
Now, cut out the snowmen. Using The Ultimate Glue, adhere one snowman to the penny on the front of the card.
Take the cut-out from the slider dies and put it on the INSIDE of your card. Take the other 2 snowmen and glue them onto the inside of your card as well, Wendy glued them on top of the slider die cut-out.

This card IS SO FUN to play with!! Watch as the little snowman rolls and tumbles across the card!!!

The last card was THE MOST FUN!!! This is a Shaker Card, which means there is a piece of acetate (clear plastic) on the front and little sequins and findings on the inside. Wendy used the Impression Obsession die-cut Peace Frame

To make the card:

Use dark green paper as the base of the card (11" x 4 1/4") and fold the card in half.
On the front of the card, Wendy cut out of piece of Alpine Trees paper by Aunthentique (4" x 4") and mounted it onto the front of the card onto the dark green paper.
Take a piece of Stardream Bronze paper (3 5/8" x 3 5/8") and a piece of acetate (3 5/8" x 3 5/8"). Use The Ultimate Glue to adhere the acetate to the back of the Bronze paper. (I usually wait about 10 minutes for it to fully dry)
Next, just like with the last card, cut strips of chipboard measuring 1/4" wide and cut the strips into 3 1/2" pieces and make 4 stacks of 2.
Glue the chipboard in place on all 4 sides like you see in the picture below... but BEFORE you glue it down onto the Alpine Trees paper, add in your shaker bits!!
Wendy used a combination of Hero Arts Sequins and new Metallic "Toppings" from Queen & Co... she just used a pinch of each.
Once you have added in the shaker pieces, carefully attach the shaker front to the Alpine Tree background paper using The Ultimate Glue.
Add a tiny bit of brown metallic ribbon (10" is good, you can always trim it down) and that's it!!

A beautiful and fun shaker card!!

Wendy designed another shaker card idea.. you'll have to stop by the store to see it in person!!

Advent Calendar, 2017

11/25/2017

It seems like every year we get more and more people coming in looking to make their own Advent Calendar!!

Each year, we put together a design to inspire you.. last year we made a shadow-box style calendar.. and this year we are using *mini envelopes* !!

To make the calendar, you will need:

One large sheet Mi Tients Red Paper (19 3/4" x 25 1/2")
One piece of Poster Board
25 Mini Envelopes
Double-sided tape
Little tags or labels
The Ultimate Glue and/or Nuvo Deluxe Adhesive
Crystal Drops (1 or 2 colors)
3-5 colors of cardstock to go inside the envelopes
Stickers or other items to put in envelopes

To start, take your 25 Mini Envelopes and turn the flap inwards so you can easily put items in the envelopes

Next, you will need to cut down your Poster Board just slightly so that it will frame-out the Red Mi Tients Paper nicely.

Poster Board - 20 3/4" x 26 1/2"
Red Mi Tients - 19 3/4" x 25 1/2"

I generally use an X-acto Knife and a ruler to cut the Poster Board.. but if you don't have those things, using a ruler, pencil, and a pair of scissors will also work.

Once you have folded-in all your envelopes, take your 3 pieces of colored cardstock and cut them using a paper cutter.

You will need 25 squares that measure 2 1/2" x 2 1/2".

These will be the little notes that go inside each envelope.
We chose a few different shades of green and red cardstock..

Then, we started laying out the shape of the calendar.. . See how Bekah laid it out to look like a tree?!?! SO CUTE.

Take note that she used one of our Star-Shaped Ribbons to add the star on the top!! LOVE IT!!

I used my ruler to be certain that my tree was centered on my Red Mi Tients Paper!!

I found that 7" from the bottom left corner was a good place to lay down my first envelope. I made sure to do the *same thing* from the right corner.

Once you have decided where to place each of the envelopes, used double-sided tape to adhere them to the Red Mi Tients Paper

Then, we used this new label set from Sizzix, Tag Dies to make the little tag shapes!!

*If you don't have a die-cut machine to make these, we have a basic tag shape in our STORE die-cut machine that customers are welcome to use*

I figured out which tag went where.. BUT BEFORE I TAPE THEM DOWN I wanted to add my numbers!!

I used the Nuvo Crystal Drops to draw the numbers!!

*You can use a pencil first and then trace over it with the Crystal Drops* if you don't think you can do it free-hand!

Once your tags are all cut out, your numbers drawn and THEY HAVE FULLY DRIED, use glue (we used the Nuvo Deluxe Adhesive) to adhere a tag to the front of each envelope.

Then, we took some of our Christmas-themed ribbons and made little bows!!

Using The Ultimate Glue, adhere a bow to the top of each tag!! It really adds an extra touch.. LOVE, LOVE, LOVE

To finish it off, we cut out some fun Christmas Greenery using the Sizzix die-cut Holiday Greens.

Using The Ultimate Glue again, we put the Greenery on the upper 2 corners of the Red Mi Tients Paper

Last, but not least, TIME TO ADD IN THE FUN STUFF!!

We used the Removable Glue Dots to put little things on the paper note cards inside each envelope..

You can add stickers, coins, even a small piece of candy!! The possibilities are endless!!

Have Fun!!!

Tuesday with Wendy, Nov 7

11/11/2017

This last grouping of Tuesday with Wendy cards had a theme.. Holiday!!

This first card was VERY POPULAR! The gals had a great time with this Christmas Card..

To make this card:

Wendy used 2 new stencils from Joggles, Flow and Fever.
Choose one of the stencils to use first
On a piece of white cardstock, use a Nuvo Dauber to apply the ink. Use Distress Oxide ink, Peeled Paint
Next, take the second stencil and the Versafine Olympic Green and, with a DIFFERENT Nuvo Dauber, apply the darker ink on top of the lighter ink. This creates that beautiful tone-on-tone color that is so stunning!
The card base is a nice red cardstock with lime green polka dot paper from Memory Box.
Wendy used the Sizzix die-cut Retro Merry Christmas and glued it on top using the Nuvo Deluxe Adhesive

The next card Wendy designed features this *adorable* new Washi Tape from Little B!

The Blue Jay Washi Tape is *just wonderful* for this card!!

To make the card:

Start out with a white cardstock base paper
Wendy used this Brushed Gold paper from Japan and taped a piece of it to the top half of the card.
Tape a strip of Blue Jay Washi Tape down onto a separate piece of white cardstock. Cut it out so that the paper and tape are the same width.
Mount it onto a piece of blue cardstock that is 1/2" wider than the tape so that you get a nice blue border on either side of the image.
Tape the blue piece down onto the base card, making sure to overlap the gold paper just slightly.
Finish the card by stamping the Avery Elle sentiment in Versafine Majestic Blue (The sentiment is part of the Avery Elle stamp set, Snowflakes).

The last card of the series was made using one of our newest *mini* stencils!

We have been getting in TONS of new stencils, especially within this last week!!

Making the card:

Wendy used one of the newer, heavy-weight cardstock papers as the card base, Chipboard Kraft. I love how this paper has a bit of a "speckle" to it which really adds some interest.
Stamp the snowflakes on the right side of the card using Hero Arts, Unicorn White ink pad. I highly recommend you use the Tim Holtz Platform to guarantee the stamps always stamp down in the same place!
Next, use the Joggles, ATC Tree stencil. Lay down the stencil on the Brown Box Kraft cardstock and use a Nuvo Dauber and Hero Arts Unicorn White ink to apply the image to the paper.
Wendy layered the tree image with a piece of navy blue cardstock before mounting it onto her card base.
To finish the card, stamp "Let it Snow" along the bottom of the card using the same Avery Elle stamp set, Snowflakes. (We used the Tim Holtz Platform for stamping this image out as well)

During class this week, some of the gals tweaked their cards *just slightly*.. and that is the JOY of taking these card making classes!

Wendy usually takes about 30 minutes to instruct how to make the cards and what techniques she used.. but after the instruction is over, students are FREE to make the cards however they like! Each student is given the pieces to make the cards.. but how you layer, how you color, and where you stamp is UP TO YOU!!

Check out these variations from one of the cards this week...

One student made a double "Merry" on hers to make "Merry, Merry Christmas"
Another student (Bekah!) cut up her "M" from "Merry" and took out an "r" to make "Very, Merry Christmas" How cute is that?!!?!

Join us for the NEXT card making class on November 21st.. it is only a $10 supplies fee and you receive a packet to make 3 cards.

Give us a call to learn more or sign up!!

360-647-9663

Tuesday with Wendy, Oct 10th

10/15/2017

The last Tuesday with Wendy class was SO MUCH FUN!!

Wendy has been starting to design some Fall and Winter cards for classes and it's been really fun to see everything she's been creating :-)

Check out last week's cards!

I just FELL IN LOVE with this first card.. this little girl is just SO SWEET!!

This card was made using the new Penny Black stamp, Hello Autumn

This card technique has just been SO FUN!!

To make this card:

Cut your paper to 11 1/2" x 4". Score it at the 5 1/2" mark
Stamp the image using the Tim Holtz Platform
Cut out only the RIGHT HALF of the image using an Exacto Knife
Lift up the left half of the card and as you fold it over to the right you will create the final fold automatically
On the left side of the little girl, use a pair of scissors to cut out some of the extra white paper.
Place a small piece of decorative paper (3" x 4") behind the image to finish off the front of the card. Use a second piece of decorative paper (3" x 4") for the inside of the card. Wendy used the Jen Hadfield line Heart and Home.
Use Prismacolor pencils to color in the image!

This next card was made using this beautiful image from Memory Box, Snowflake Swell.

To make this card:

Lay down a piece of Crystal white Stardream paper (5 1/2" x 3 1/4") on your die-cut machine.
Next, lay down the die-cut so that it is centered on the piece of white paper. THE WHITE PAPER IS A GUIDE ONLY!! DO NOT CUT IT!
Lay down the dark blue snowflake paper (5 1/2" x 3 1/2") on top of the die-cut and run it through the machine. This will cut out the Snowflake Swell in the dark blue paper. This snowflake paper is by Reminisce

After you have cut out the Snowflakes, it is time for the FUN part!!

Use the Joy stamp from Impression Obsession to stamp and emboss the sentiment. Wendy placed it at a slight angle on the right side.
Then we used the Silver Sparkle stickers from Stampendous to add some *bling*

This last card was inspired by this wonderful die-cut by Memory Box, Evergreen Reindeer

This card is just a matter of layering!!

This is a standard A2 size card (which means it's a half sheet of paper folded in half), the base is a Kraft brown color by Speckletone
Using a Home Die-Cut machine, emboss the FRONT of the brown base paper AND a piece of Opal Stardream paper (3 5/8" x 3 7/8") with the Sizzix embossing folder, Simple Snowflakes
Next, die-cut the Evergreen Reindeer out of the *Brand New* brown metallic paper (3 1/2" x 3 3/4")
Layer the Opal paper behind the brown and finish with the burgundy tone paper (4" x 3 7/8")

Join us for the NEXT Tuesday with Wendy class!!
The next class date is October 24th, give us a call by October 21st to sign up!!

<<Previous

Tuesday with Wendy, Jan 22

Tuesday with Wendy, Dec 18th

Tuesday with Wendy, Dec 4th

Tuesday with Wendy, Nov 20th

Tuesday with Wendy, Nov 6th

Tuesday with Wendy, Oct 23rd

Tuesday with Wendy, Oct 2nd

Tuesday with Wendy, August 28th

ALL NEW Memory Box!!!

Hand Punches

NEW STUFF!!!!! August 2018

NEW STUFF!!!!!!!

Tuesday with Wendy, Jan 30th

White Embossing and Watercolor Resist

Demo: Mini Envelopes

Tuesday with Wendy, Dec 5th

Tuesday with Wendy, Nov 21

Advent Calendar, 2017

Tuesday with Wendy, Nov 7

Tuesday with Wendy, Oct 10th

Stampadoodle's
Blog
All the newest stuff

Archives

Categories

Stampadoodle'sBlogAll the newest stuff

Archives

Categories

Stampadoodle's
Blog
All the newest stuff